Glass
Shower Enclosures
- Well known for being difficult to clean and maintain. The major cleaning
product manufacturers like Proctor & Gamble and Lysol have all
followed
suit in bringing daily shower sprays to market. With a single application
lasting for years, Diamon-Fusion® virtually eliminates the need for those
daily shower sprays.
In fact, Diamon-Fusion® is less expensive than those sprays when you take
into account the labor needed to reapply. With Diamon-Fusion® all that is
needed to maintain the treated glass is a splash of clean water after each
shower and an occasional swipe with a body scrubber (similar to the one used
with soft soap for your skin).
Automotive Glass - The Diamon-Fusion®
process is the only process for windshields that can be applied in the field
on existing vehicles as well as new vehicles for pennies a square foot. Every
other treatment being marketed as a coating for auto glass are only selling on
the attribute of making the drivers vision
clearer in bad weather and making
the
windshield easier to clean. Diamon-Fusion® not only offers those benefits,
but also makes the glass harder to scratch or break. (see test results run at
Alfred University that showed an object must weigh ten times more to do damage
to a Diamon-Fusion® treated surface than an untreated one).
Plus, Diamon-Fusion® lasts much longer and is less effected by the abrasion
caused by the windshield wipers. And, it also aids in the removal of snow and
ice.
Diamon-Fusion® really make a difference IN visibility - click
here to see the difference!
Sandblasted
or Etched Glass
- This very popular application is used for two main purposes. Architects will
specify sandblasted glass as a means for allowing light to come in to a room
while still allowing for privacy. The inherent problem with this type of glass
is that it stains very easily and shows fingerprints that typically cannot be
removed. DFI has developed an Etched and Sandblasted Cleaner that allows us to
restore most etched surfaces back to their original state prior to applying
the Diamon-Fusion® process.
Once
the Diamon-Fusion® process has been applied, in many cases, fingerprints will
no longer show themselves and in those cases where they do, they are now
easily removed. The glass also becomes water repellant so any water that prior
to treatment would have created a dark and wide stain now beads up and runs
off.
Windscreens
- Exterior glass windscreens have become extremely popular in the last ten
years. In many cases, landscaping is near the windscreen and over spray from
sprinklers can quickly damage the glass and leaves it looking cloudy.
Diamon-Fusion® solves this problem by making the glass more water repellant.
Water spots take
longer
to appear and when they do appear, are much easier to remove. Thus, required
maintenance is less frequent. People who have Diamon-Fused their windscreens
can maintain them very easily by walking the length of the windscreen and
spraying the glass with de-ionized water. The Diamon-Fusion® treatment makes
it so that dirt and debris run right off. The de-ionized water means that when
the water dries, it dries clear
.
Skylights:
- The use of skylights in homes has skyrocketed over recent years. More
architects are designing interesting geometric shaped skylights as part of the
homes overall design and not just simply as a way of bringing in more natural
light. With the advent of high performance glasses that can control heat,
light and
ultra-violets, many applications previously thought to be poor locations are
now being used. The problem that up until now had not been solved was the
difficult maintenance that is required because of the access problems.
Diamon-Fusion® solves this and other problems related to skylights. People
who have had Diamon-Fusion® put on their existing skylights have made
comments like the following: "Before I had Diamon-Fusion®, every time it
rained I would get mud trails on the skylights. Now every time it rains all
the dirt and bird droppings runs right off and it looks like somebody has
recently cleaned them.”